Euphonix R-1 Remote Manual de usuario descargar pdf (Pagina 9)

Technical Specifications

Performance Specifications

Main inputs (Solo, CR 7 Mon A, B, C & D)

Description: Electronically balanced, transformerless, differential input

Gain: Variable from unity (0dB) to –72dB

Optimum input levels: Designed to be fed from Euphonix MA703 DAC, set to 0dBFS

= +27dBU

Maximum input level before clipping: +28dBU (sine wave)

Maximum input voltages: ±16VDC, ±25VAC (common mode), ±50VAC (differential)

Input impedance: 10KΩ ± 10% each leg, 20Hz – 20KHz

CMRR: >40dB (50dB typical), 20Hz – 20KHz

Talk Back and Listen mic inputs (T1, T2, L1 through L4)

Description: Electronically balanced, transformerless, differential input with

automatic level optimization

Gain: AGC circuit optimizes front end gain to produce (approx.)

+8dBU signal; this is then variable from +8 to –64dBU at the

monitor outputs

Maximum input level before clipping: 10dBU (sine wave)

Maximum input voltages: ±50VDC, ±2.5VAC (common mode), ±5VAC (differential)

Phantom power: 48V available, link selectable on PCB

Frequency response: Attenuated LF and HF response, -3dB at 200Hz and 10KHz

Monitor outputs

Description: Electronically balanced & floating, differential output

Maximum output level: +28dBU (sine wave)

Output impedance: 100Ω ± 10%, balanced or unbalanced, 20Hz – 20KHz

DC offset: Less than ±5mV with respect to chassis GND

Full signal path (Main input to monitor output)

Frequency response: 0/-0.4dB, 20Hz – 20KHz (ref. 1kHz)

Signal breakthrough with full cut: <-110dB, 20Hz – 20KHz

Distortion: <0.005%, 20Hz – 20KHz, +15dBU output level

Crosstalk: Better than -100dB at 1kHz; better than -90dB at 20KHz

Output noise: <-90dBU rms (unweighted), giving at least 117dB of dynamic

range at unity gain

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 24 25

Sin comentarios

Euphonix R-1 Remote Manual de usuario Pagina 9