Euphonix MixView CS3000 Manual de instalación descargar pdf (Pagina 79)

Section 11: Miscellaneous

Euphonix CS3000/2000 MixView 3.0 Software Supplement 11 - 73

n order to make it easier to locate to a specific place within your program,

v3.0 adds a new SmartDisplay Locate menu.

The Locate menu is accessed by pressing the DSC Transport Control [Loc] key.

When first pressed, the Cue List is no longer automatically displayed on the

DSC screen. Instead the SmartDisplay menu allows the user to enter a time-

code position or a Cue Number:

F3F1 F2 F4

To locate to a specific timecode address, type in the numbers using the DSC

Numeric keypad. Type in the TC address in hrs:mins:secs.frames as the

address field is filled from right to left. If you make a mistake, you can use the

[Del] key as a backspace key. It is not necessary to type leading zeros and it is

no longer necessary to use the *ST key to enter frames. As an exercise, type

in 7 minutes, 35 seconds and 20 frames:

F3F1 F2 F4

Press [Enter] to locate to the new address:

SECTION 11 : MISCELLANEOUS

00:00:07.35 Mark Cue

00:07:35.20 Mark Cue

TC address field fills from right to left

00:00:00.00 Mark Cue

789

456

123

Locate Menu

System

Locate Menu

Overview

Once a position has been located using the Enter key, the timecode position is

remembered so that pressing the [Loc] key twice at any time locates to the

last recalled position.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 85

Sin comentarios

Euphonix MixView CS3000 Manual de instalación Pagina 79