Euphonix FC727 Instrucciones de operaciones descargar pdf (Pagina 22)

Euphonix FC727 Format Converter Users Manual Operating Instructions

12. Press the Recalibrate Inputs button in the Hardware Setup dialog.

After making any changes in the Hardware Setup dialog, you must press the

Recalibrate Inputs button.

13. Press OK and you are ready to begin.

You should now be able to make bidirectional transfers from a MADI device to Pro

Tools. The Format B MADI audio input is transferred to the Pro Tools workstation.

The audio from the Pro Tools workstation leaves the FC727 on the Format B MADI

output. See your Pro Tools documentation for more information on Pro Tools set-up.

2.2 SDIF-2

SDIF-2 is a 24-channel format with inputs and outputs on separate DB-50 connectors.

The FC727/726 SDIF-2 adapter has three DB-50 connectors, one for each eight-chan-

nel bank (labeled 1–8, 9–16, 17–24) but they may be connected to any FC727/726 bank.

This allows routing the channels in eight-channel groups.

The SDIF-2 format requires connecting an external word clock on a BNC cable from the

SDIF device to the FC727/726’s SDIF-2 Sync input or the FC727/726 will not lock. Turn

the MADI switch on the FC727/726 front panel to OFF (center position).

2.3 TDIF

1. Connect the TDIF adapter to the DB-50 connector(s) on the FC727/726’s rear

panel.

2. Turn the MADI switch on the FC727/726 front panel to OFF (center position).

3. To avoid SRC, either lock the TDIF device to the MADI B device, or lock the

MADI B device to the TDIF device.

To lock the TDIF device to the MADI B device (i.e, Euphonix System 5 or R-1),

connect a word clock from the MADI device to the TDIF device’s Word Sync In.

The Format B Word Sync Out on the FC727/726 may be used if no other word

clock output is available. Set the TDIF device to slave to its word clock input.

To lock the MADI B device to the TDIF device, connect the TDIF device’s Word

Sync Out to the MADI B device’s word clock input (i.e, on the Euphonix Studio

Hub). Set the MADI B device to slave to its word clock input.

4. SRC is required if the MADI B device runs at 96 kHz and the TDIF device at

48 kHz. The TDIF and MADI B devices can each run on their own internal sample

clocks without additional sync signals.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Sin comentarios

Euphonix FC727 Instrucciones de operaciones Pagina 22